Commit 884741f6 authored by Seppia's avatar Seppia

Changed Z-Axis step per unit after removing microstepping.

Adjusted Z-Axis max feedrate and acceleration. Changed Z probe offset
from extruder.
parent 8b9400df
......@@ -488,14 +488,14 @@
* Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 88.888888889, 80, 16000, 73 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 88.888888889, 80, 2000, 73 }
/**
* Default Max Feed Rate (mm/s)
* Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_MAX_FEEDRATE { 125, 125, 2.5, 40 }
#define DEFAULT_MAX_FEEDRATE { 125, 125, 2, 40 }
/**
* Default Max Acceleration (change/s) change = mm/s
......@@ -503,7 +503,7 @@
* Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 50, 10000 }
/**
* Default Acceleration (change/s) change = mm/s
......@@ -646,7 +646,7 @@
*/
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -10.2 //-10.6 //-11.1 // Z offset: -below +above [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -11.11 // Z offset: -below +above [the nozzle]
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment