Y-Axis Remapped and minor code adjustments

Remapped Y-Axis to Extruder-1 and substituted tabs with spaces in pins.h

Marlin/pins.h

@@ -98,7 +98,7 @@
 
 /****************************************************************************************
 * Leapfrog Driver board
-* 
+*
 ****************************************************************************************/
 #if MB(LEAPFROG)  // Leapfrog board
 #define KNOWN_BOARD 1
@@ -599,9 +599,9 @@
     #define X_MIN_PIN           3
     #define X_MAX_PIN           2
 
-    #define Y_STEP_PIN         60
-    #define Y_DIR_PIN          61
-    #define Y_ENABLE_PIN       56
+//    #define Y_STEP_PIN         60
+//    #define Y_DIR_PIN          61
+//    #define Y_ENABLE_PIN       56
     #define Y_MIN_PIN          14
     #define Y_MAX_PIN          15
 
@@ -611,9 +611,9 @@
     #define Z_MIN_PIN          18
     #define Z_MAX_PIN          19
 
-    #define Y2_STEP_PIN        36
-    #define Y2_DIR_PIN         34
-    #define Y2_ENABLE_PIN      30
+    #define Y_STEP_PIN        36
+    #define Y_DIR_PIN         34
+    #define Y_ENABLE_PIN      30
 
     #define Z2_STEP_PIN        36
     #define Z2_DIR_PIN         34
@@ -1962,7 +1962,7 @@
   http://www.pjrc.com/teensy/teensyduino.html
 * See http://reprap.org/wiki/Printrboard for more info
 * CLI build: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84  make
-* 
+*
 ****************************************************************************************/
 #if MB(TEENSY2)
 #define KNOWN_BOARD 1
@@ -1974,37 +1974,37 @@
 
 #define LARGE_FLASH        true
 
-/* 
+/*
 DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a TeensyBreadboard:
 
                                USB
            GND       GND |-----#####-----| +5V              ATX +5SB
-     ATX PS_ON    PWM 27 |b7   #####   b6| 26    PWM*       Stepper Enable 
-                  PWM  0 |d0           b5| 25    PWM*        
-                  PWM  1 |d1           b4| 24    PWM        
+     ATX PS_ON    PWM 27 |b7   #####   b6| 26    PWM*       Stepper Enable
+                  PWM  0 |d0           b5| 25    PWM*
+                  PWM  1 |d1           b4| 24    PWM
          X_MIN         2 |d2           b3| 23               MISO_PIN
          Y_MIN         3 |d3           b2| 22               MOSI_PIN
-         Z_MIN         4 |d4  * *      b1| 21               SCK_PIN       
-                       5 |d5  e e      b0| 20               SDSS              
-                LED    6 |d6  5 4      e7| 19               
-                       7 |d7           e6| 18               
-       LCD  RS         8 |e0             | GND              
-       LCD  EN         9 |e1   a4 a0    R| AREF             
-       LCD  D4        10 |c0   a5 a1   f0| 38 A0            ENC_1           
+         Z_MIN         4 |d4  * *      b1| 21               SCK_PIN
+                       5 |d5  e e      b0| 20               SDSS
+                LED    6 |d6  5 4      e7| 19
+                       7 |d7           e6| 18
+       LCD  RS         8 |e0             | GND
+       LCD  EN         9 |e1   a4 a0    R| AREF
+       LCD  D4        10 |c0   a5 a1   f0| 38 A0            ENC_1
        LCD  D5        11 |c1   a6 a2   f1| 39 A1            ENC_2
        LCD  D6        12 |c2   a7 a3   f2| 40 A2            ENC_CLK
-       LCD  D6        13 |c3           f3| 41 A3            
-      Bed Heat    PWM 14 |c4   V G R   f4| 42 A4            
- Extruder Heat    PWM 15 |c5   c n S   f5| 43 A5            
+       LCD  D6        13 |c3           f3| 41 A3
+      Bed Heat    PWM 14 |c4   V G R   f4| 42 A4
+ Extruder Heat    PWM 15 |c5   c n S   f5| 43 A5
            Fan    PWM 16 |c6   c d T   f6| 44 A6            Bed TC
-                      17 |c7   * * *   f7| 45 A7            Extruder TC * 4.7k * +5        
-                         -----------------                  
+                      17 |c7   * * *   f7| 45 A7            Extruder TC * 4.7k * +5
+                         -----------------
 
       Interior E4: 36, INT4
       Interior E5: 37, INT5
       Interior PA0-7: 28-35  -- Printrboard and Teensylu use these pins for step & direction:
              T++ PA Signal  Marlin
-    
+
        Z STEP  32 a4  a0 28 X STEP
        Z DIR   33 a5  a1 29 X DIR
        E STEP  34 a6  a2 30 Y STEP
@@ -2019,7 +2019,7 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
 
 #define X_STEP_PIN         28 //  0 Marlin
 #define X_DIR_PIN          29 //  1 Marlin
-#define X_ENABLE_PIN       26 
+#define X_ENABLE_PIN       26
 
 #define Y_STEP_PIN         30 //  2 Marlin
 #define Y_DIR_PIN          31 //  3
@@ -2049,7 +2049,7 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
 #define TEMP_2_PIN         -1
 
 #define SDPOWER            -1
-#define SDCARDDETECT       -1   
+#define SDCARDDETECT       -1
 #define SDSS               20 // 8
 #define LED_PIN             6
 #define PS_ON_PIN          27
@@ -2122,9 +2122,9 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
 #define E0_ENABLE_PIN      13
 
 #define TEMP_0_PIN          0   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
-#define TEMP_1_PIN         -1   
+#define TEMP_1_PIN         -1
 #define TEMP_2_PIN         -1
-#define TEMP_BED_PIN        5   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)  
+#define TEMP_BED_PIN        5   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
 #define SDPOWER            -1
 #define SDSS               4
 #define HEATER_2_PIN       -1
@@ -2486,7 +2486,7 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
 #endif //ULTRA_LCD
 
 #ifdef FILAMENT_SENSOR
-  //Filip added pin for Filament sensor analog input 
+  //Filip added pin for Filament sensor analog input
   #define FILWIDTH_PIN        3
 #endif //FILAMENT_SENSOR