Commit 860d772b authored by Mattia Bondanza's avatar Mattia Bondanza

Aggiornati alcuni parametri.

parent 5a9ce1e9
......@@ -396,9 +396,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
// these are the offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets must be integers
// TODO
#define X_PROBE_OFFSET_FROM_EXTRUDER -25
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
#define X_PROBE_OFFSET_FROM_EXTRUDER -30
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15
#define Z_PROBE_OFFSET_FROM_EXTRUDER -36.5
#define Z_RAISE_BEFORE_HOMING 10 // (in mm) Raise Z before homing (G28) for Probe Clearance.
// Be sure you have this distance over your Z_MAX_POS in case
......@@ -473,15 +473,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
//// MOVEMENT SETTINGS
// TODO
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min)
#define HOMING_FEEDRATE {4000, 4000, 240, 0} // set the homing speeds (mm/min)
// default settings
// TODO estrusore soltanto
#define DEFAULT_AXIS_STEPS_PER_UNIT {160,177.7778,8000,200} // default steps per unit for Ultimaker
#define DEFAULT_MAX_FEEDRATE {500, 500, 300, 25} // (mm/sec)
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 88.8889,8000,200} // default steps per unit for Ultimaker
#define DEFAULT_MAX_FEEDRATE {15000, 15000, 300, 25} // (mm/sec)
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment